Length – Dimensional Metrology
ให้บริการสอบเทียบเครื่องมือวัดทางด้านมิติ
Gauge Block Surface Plate Vernier/Caliper Thread Plug/Ring Gauge
CMM Micrometer Contour/Contracer Taper Thread Plug/Ring Gauge
Air Micrometer Pin/Plug Gauge Measuring Microscope Taper Plug/Ring Gauge
Ring Gauge Profile Projector Roughness Tester/ Specimen Spline Gauge
Glass Scale Thread Plug Gauge Laser Scan Micrometer Universal Length Measuring Machine
Height Master Calibration Tester Coating Thickness Gauge Snap Gauge, Gap Gauge, Ball Gauge
Holtest/Bore Gauge Protractor Ultrasonic Thickness Flaw Detector
Steel Tape/ Pi Tape Radius Gauge Dial Gauge/Dial Test Indicator Angle Measurement
Height Gauge Electrical Comparator Electronic/Precision Level Roughness Specimen
Shaft Alignment Setting Rod, Length Bar Steel/Metal Rule Pitch Gauge, Angle Gauge
Other Eqipments (Pls Contact)
Length – Dimensional Metrology ISO/IEC 17025 Accreditation
Parameter/Equipment |
Range |
Expanded Uncertainty of Measurement (+/-) |
Reference Standard, Method, and/or Equipment |
|
1 Calipers Offset Center Line Caliper Dial Caliper
|
Up to 150 mm (> 150 to 200) mm (> 200 to 300) mm (> 300 to 450) mm (> 450 to 600) mm (> 600 to 1000 mm |
0.007 mm 0.007 mm 0.007 mm 0.007 mm 0.008 mm 0.01 mm |
Gauge Blocks and Caliper Checker |
|
1 Digital Indicator Dial Gauge Dial Indicator Digimicro
|
Up to 1 mm (> 1 to 12.7) mm (> 12.7 to 25) mm (> 25 to 50) mm (> 50 to 100) mm |
0.000 5 mm 0.000 65 mm 0.000 75 mm 0.000 85 mm 0.000 95 mm |
Calibration Tester and Gauge Block |
|
Up to 100 mm |
0.37 + 0.0025L µm |
Universal Length Measuring Machine |
|
|
1 Dial Test Indicator Pictest Dial Gauge (Level type) |
Up to 0.14 mm (> 0.14 to 0.6) mm (> 0.6 to 1) mm (> 1 to 1.5) mm |
0.000 5 mm 0.000 75 mm 0.000 8 mm 0.001 6 mm |
Calibration Tester and Gauge Block |
|
Up to 1) mm (> 1 to 2) mm |
0.000 5 mm 0.001 1 mm |
Universal Length Measuring Machine |
|
|
1 Electrical Comparator/ Mu Checker |
(0 to 0.5) mm (> 0.5 to 1) mm (> 1 to 5) mm (> 5 to 10) mm |
0.000 09 mm 0.000 13 mm 0.000 13 mm 0.000 15 mm |
Calibration Tester and Gauge Block Set |
|
1 Inside Micrometer Tubular Inside Micrometers
|
(5 to 30) mm (> 25 to 50) mm (> 50 to 75) mm (> 75 to 100) mm (> 100 to 125) mm (> 125 to 200) mm (> 200 to 300) mm (> 300 to 500) mm (> 500 to 600) mm |
0.000 6 mm 0.000 7 mm 0.000 7 mm 0.000 8 mm 0.001 mm 0.002 mm 0.003 mm 0.004 mm 0.005 mm |
Gauge Blocks |
|
Up to 600 mm |
(0.68 + 0.0025L) µm |
Universal Length Measuring Machine, Gauge Block |
|
|
1 Outside Micrometer Disk Micrometer Digital Micrometer Tube Micrometer Point Micrometer Crimp height micrometer Gear Tooth micrometer Screw Thread Micrometer
|
(0 to 25) mm (> 25 to 50) mm (> 50 to 75) mm (> 75 to 100) mm (> 100 to 125) mm (> 125 to 200) mm (> 200 to 300) mm (> 300 to 500) mm (> 500 to 600) mm (> 600 to 700) mm (> 700 to 825) mm (> 825 to 1 000) mm |
0.000 6 mm 0.000 7 mm 0.000 7 mm 0.000 8 mm 0.001 mm 0.002 mm 0.003 mm 0.004 mm 0.005 mm 0.006 mm 0.007 mm 0.008 mm |
Gauge Blocks |
|
1 Indicating Micrometer Snap Micrometer |
(0 to 25) mm (> 25 to 50) mm (> 50 to 75) mm (> 75 to 100) mm |
0.000 75 mm 0.000 75 mm 0.000 8 mm 0.000 85 mm |
Gauge Blocks |
|
1 Depth Micrometer Digital Depth Micrometer |
(0 to 25) mm (> 25 to 50) mm (> 50 to 75) mm (> 75 to 100) mm (> 100 to 125) mm (> 125 to 150) mm (> 150 to 175) mm (> 175 to 200) mm (> 200 to 225) mm (> 225 to 250) mm (> 250 to 275) mm (> 275 to 300) mm |
0.001 3 mm 0.001 3 mm 0.001 3 mm 0.001 4 mm 0.001 5 mm 0.001 9 mm 0.002 mm 0.002 1 mm 0.002 2 mm 0.002 4 mm 0.002 6 mm 0.002 7 mm |
Gauge Blocks |
|
1 Height Gauge Linear Height Precision Height Gauge Mastra Trouch |
Up to 75 mm (> 750 to 100) mm (> 100 to 200) mm (> 200 to 300) mm (> 300 to 450) mm (> 450 to 600) mm (> 600 to 1 000) mm |
0.001 1 mm 0.001 5 mm 0.002 mm 0.002 5 mm 0.003 5 mm 0.004 5 mm 0.007 mm |
Gauge Blocks and Surface Plate |
|
1 Depth Gauge Vernier Depth Gauge Digital Depth Gauge |
Up to 300 mm (> 300 to 600) mm (> 600 to 1 000) mm (>1 000 to 1 200) mm |
0.000 7 mm 0.000 8 mm 0.001 mm 0.001 3 mm |
Gauge Blocks and Surface Plate |
|
1Feeler Gauge Thickness Plate Calibration Foils |
(0.01 to 10) mm |
0.001 1 mm |
Digital Linear Gauge |
|
Up to 10 mm |
0.000 4 mm |
Universal Length Measuring Machine |
|
|
1 Thickness Gauge Dial Thickness Gauge Digimatic Thickness Gauge |
Up to 12 mm (> 12 to 25) mm (> 25 to 50) mm (> 50 to 75) mm (> 75 to 100) mm |
0.000 2 mm 0.000 3 mm 0.000 4 mm 0.000 6 mm 0.000 8 mm |
Gauge Block |
|
1 Holtest, Three-points internal micrometer, Bore Gauge |
(3 to 16) mm (> 16 to 35) mm (> 35 to 75) mm (> 75 to 100) mm (> 100 to 125) mm |
0.000 7 mm 0.001 mm 0.001 5 mm 0.002 mm 0.002 3 mm |
Ring Gauge |
|
3 to 300 mm |
(0.9 + 0.0018L) µm |
Universal Length Measuring Machine, |
Length – Dimensional Metrology ISO/IEC 17025 Accreditation
Parameter/Equipment |
Range |
Expanded Uncertainty of Measurement (+/-) |
Reference Standard, Method, and/or Equipment |
Steel Tape Textile Tape Thank Tape Pi Tape Diameter Tape Tape Measure |
(Up to 1) m (> 1 to 2) m (> 2 to 3) m (> 3 to 4) m (> 4 to 5) m (> 5 to 6) m (> 6 to 7) m (> 7 to 8) m (> 8 to 9) m (> 9 to 10) m (> 10 to 15) m (> 15 to 20) m (> 20 to 25) m (> 25 to 30) m (> 30 to 35) m (> 35 to 40) m (> 40 to 45) m (> 45 to 50) m |
0.015 mm 0.024 mm 0.036 mm 0.048 mm 0.06 mm 0.072 mm 0.084 mm 0.096 mm 0.11 mm 0.12 mm 0.18 mm 0.25 mm 0.3 mm 0.36 mm 0.42 mm 0.48 mm 0.55 mm 0.6 mm |
Scale Calibrator |
|
1 Steel Ruler Metal Rule Ruler |
(Up to 200) mm (>200 to 500) mm (> 500 to 1 000) mm (>1 000 to 1 500) mm (> 1 500 to 2 000) mm |
0.005 mm 0.02 mm 0.025 mm 0.04 mm 0.045 mm |
Scale Calibrator, Video Measuring System, Standard Rule |
|
1 Contour Measuring Contracer, Contourecord Radius
Length Measurement |
(Up to 30) mm
(Up to 25) mm (> 25 to 100) mm (> 100 to 150) mm |
0.85 µm
0.6 µm 0.9 µm 1.2 µm |
Standard Gauge Block Pin Gauge
|
|
1 Coordinate Measuring Machine Layout Machine CMM 3D Measurement |
(Up to 50) mm (> 50 to 100) mm (> 100 to 200) mm (> 200 to 300) mm (> 300 to 400) mm (> 400 to 500) mm (> 500 to 600) mm (> 600 to 700) mm (> 700 to 800) mm (> 800 to 900) mm (> 900 to 1000) mm (> 1000 to 1200) mm |
0.5 µm 1 µm 1.5 µm 2.5 µm 3 µm 3.6 µm 4.5 µm 5 µm 5.7 µm 6.5 µm 7 µm 8.5 µm |
ISO 10360-2 Standard Gauge Block |
|
1 Ultrasonic Thickness Gauge Flaw Detector Ultrasonic Meter |
Up to 100 mm (>100 to 220) mm |
0.000 1 mm 0.003 2 mm |
Gauge Block |
|
Plain Ring Gauge Ring Gauge Master Ring Gauge |
(0.5 to 10) mm (> 10 to 20) mm (> 20 to 30) mm (> 30 to 50) mm (> 50 to 100) mm (> 100 to 150) mm (> 150 to 200) mm |
0.4 µm 0.53 µm 0.56 µm 0.8 µm 1.5 µm 1.8 µm 2 µm |
Ring Gauge, Master Height |
|
0.1 to 400 mm |
(0.36 + 0.0045L) µm |
Universal Length Measuring Machine, Ring Gauge |
|
|
1 Angle Measurement |
Up to 180 ° |
0.0022 ° |
Angle Block |
|
Gauge Block Long Gauge Block Square Gauge Block Steel Gauge Block Ceramic Gauge Block Tungsten Carbide Gauge Blocks |
Up to 0.5 mm (> 0.5 to 10) mm (> 10 to 25) mm (> 25 to 50) mm (> 50 to 75) mm (> 75 to 100) mm (> 100 to 125) mm (> 125 to 150) mm (> 150 to 175) mm (> 175 to 200) mm (> 200 to 250) mm (> 250 to 300) mm |
0.09µm 0.09µm 0.094 µm 0.11 µm 0.13 µm 0.15 µm 0.17 µm 0.19 µm 0.22 µm 0.25 µm 0.3 µm 0.35 µm |
JIS B 7506, Gauge Block, Gauge Block Comparator |
|
(> 100 to 125) mm (> 125 to 150) mm (> 150 to 175) mm (> 175 to 200) mm (> 200 to 250) mm (> 250 to 300) mm (> 300 to 400) mm (> 4000 to 500) mm |
0.23 µm 0.23 µm 0.27 µm 0.33 µm 0.39 µm 0.60 µm 0.72 µm |
Universal Length Measuring Machine, Gauge Block |
|
|
Universal Length Measuring Machine ULM |
(Up to 100) mm (>100 to 600) mm |
(0.11 + 0.0033L) µm |
Standard Gauge Block |
Length – Dimensional Metrology ISO/IEC 17025 Accreditation
Parameter/Equipment |
Range |
Expanded Uncertainty of Measurement (+/-) |
Reference Standard, Method, and/or Equipment |
|
Taper Plug Gauge Cone Plug Gauge Cylindrical Plug Gauge |
Diameter Up to 300 mm
Haft Angle Up to 45°
Thickness/Step Up to 100 mm |
(0.88 + 0.0032L) µm
0.01°
(0.35 + 0.0033L) µm |
Universal Length Measuring Machine, Standard Pin Gauge, Gauge Block |
|
Thread Plug Gauge Screw Gauge, Thread Gauge Type: M, MF, MJ, UNC, UNF,UNEF, UN, UNS, UNRC, UNRF, UNREF, UNR,UNRS, BSW, BSF, UNJC, UNJF,UNJEF, UNJ, UNJS, UNM |
Pitch Diameter Up to 150 mm
Major Diameter Up to 150 mm |
(0.79 + 0.003L) µm
(0.36 + 0.003L) µm |
Universal Length Measuring Machine, Thread Wires |
|
Taper Thread Plug Gauge Type: G, PF, R, Rp, Rc, PT, PS, NPT, NPSC, NPTR, NPSM, NPSL, NPTF, PTF-SAE Short, NPSF, NPSI, F-PTF |
Pitch Diameter Up to 150 mm
Major Diameter Up to 150 mm
Thickness/Step Up to 100 mm |
(0.94 + 0.0055L) µm
(0.36 + 0.0025L) µm
(0.36 + 0.0025L) µm |
Universal Length Measuring Machine, Thread Wires, Gauge Block |
|
Taper Ring Gauge Cone Ring Gauge Cylindrical Plug Gauge
|
Diameter Up to 300 mm
Haft Angle Up to 45°
Thickness/Step Up to 100 mm |
(0.62 + 0.0033L) µm
0.005°
(0.62 + 0.0033L) µm |
Universal Length Measuring Machine, Master Ring Gauge |
|
Thread Ring Gauge Type: M, MF, MJ, UNC, UNF,UNEF, UN, UNS, UNRC, UNRF, UNREF, UNR,UNRS, BSW, BSF, UNJC, UNJF,UNJEF, UNJ, UNJS, UNM |
Pitch Diameter Up to 150 mm
Minor Diameter Up to 150 mm |
(0.62 + 0.005L) µm
(3.47 + 0.0058L) µm |
Universal Length Measuring Machine, Master Ring Gauge, 3D Vision Measuring System |
|
Taper Thread Ring Gauge Type: G, PF, R, Rp, Rc, PT, PS, NPT, NPSC, NPTR, NPSM, NPSL, NPTF, PTF-SAE Short, NPSF, NPSI, F-PTF |
Pitch Diameter Up to 150 mm
Taper Up to 15°
Thickness/Step Up to 100 mm |
(0.94 + 0.003L) µm
0.01°
(0.36 + 0.003L) µm |
Universal Length Measuring Machine, Master Ring Gauge |
|
Snap Gauge, Gap Gauge (Internal & External) |
Up to 400 mm |
(0.62 + 0.006L) µm |
Universal Length Measuring Machine, Master Ring Gauge, Gauge Block |
|
1Cylinder Gauge, Bore Gauge |
Indication Error Up to 12.7 mm
Repeatability Up to 600 mm |
0.43 + 0.0038L µm
0.43 + 0.0035L µm
|
Universal Length Measuring Machine, Calibration Tester, Master Ring Gauge, Gauge Block |
1. On-site calibration service is available for this parameter, since on-site conditions are typically more variable than those in the laboratory, larger measurement uncertainties are expected on-site than what is reported on the accredited scope
